用于位置检测的故障安全感应传感器
-机电控制装置的EN 60947-5-3认证
-确保操作员和机器安全
-不需要用于电子故障安全传感器的特殊致动器
-连接到安全接口,安全控制器或安全PLC(即AD SR1, Mosaic)
典型应用:门或翻门的关闭位置检测、油缸轴检测、踩踏检测、汽车起重机的摇枕检测、工作区域的机器人单元工作限制、门检测、风机叶片锁定/末端位置
安全感应传感器,方形接头,启用4/20 mm区域,非嵌入式安装,2个OSSD输出
1293008
用于位置检测的故障安全感应传感器
-机电控制装置的EN 60947-5-3认证
-确保操作员和机器安全
-不需要用于电子故障安全传感器的特殊致动器
-连接到安全接口,安全控制器或安全PLC(即AD SR1, Mosaic)
典型应用:门或翻门的关闭位置检测、油缸轴检测、踩踏检测、汽车起重机的摇枕检测、工作区域的机器人单元工作限制、门检测、风机叶片锁定/末端位置
安全水平 | PL e |
安全等级(SIL / PL) | SIL 3 - PL e |
工作温度 (°C) | -25到70 |
响应时间 (ms) | ≤ 50 |
传感器类型 | 故障安全感应传感器 |
安全输出型 | 2 OSSD DC PNP ( 400 mA, 24 VDC 下) |
安全输出数量 | 2 OSSD PNP ( 400 mA, 24 VDC 下) |
LED信号指示 | 双色 LED:信号(黄色)。电源(绿色) |
包装尺寸 W x H x L (mm) | 60 x 163 x 90 |
产品分类 | C |
海关代码 | 9032890 |
连接类型 | 带电缆 |
电源 (VDC) | 24 ± 20% |
工作电流 (mA) |
尺寸HxWxD (mm) | 40 x 40 x 66 |
防护等级 | IP 65 - IP 67 |
紧固方法 | 预装尖支架 |
安装方式 | 不可齐平安装 |
外壳 | 锌合金压铸件; PPE头 |
毛重 (g) | 356 |
开关距离 (mm) | 4 ... 20 |
尺寸 | 矩形的 |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
用于位置检测的故障安全感应传感器
-机电控制装置的EN 60947-5-3认证
-确保操作员和机器安全
-不需要用于电子故障安全传感器的特殊致动器
-连接到安全接口,安全控制器或安全PLC(即AD SR1, Mosaic)
典型应用:门或翻门的关闭位置检测、油缸轴检测、踩踏检测、汽车起重机的摇枕检测、工作区域的机器人单元工作限制、门检测、风机叶片锁定/末端位置
安全水平 | PL e |
安全等级(SIL / PL) | SIL 3 - PL e |
工作温度 (°C) | -25到70 |
响应时间 (ms) | ≤ 50 |
传感器类型 | 故障安全感应传感器 |
安全输出型 | 2 OSSD DC PNP ( 400 mA, 24 VDC 下) |
安全输出数量 | 2 OSSD PNP ( 400 mA, 24 VDC 下) |
LED信号指示 | 双色 LED:信号(黄色)。电源(绿色) |
包装尺寸 W x H x L (mm) | 60 x 163 x 90 |
产品分类 | C |
海关代码 | 9032890 |
连接类型 | 带电缆 |
电源 (VDC) | 24 ± 20% |
工作电流 (mA) |
尺寸HxWxD (mm) | 40 x 40 x 66 |
防护等级 | IP 65 - IP 67 |
紧固方法 | 预装尖支架 |
安装方式 | 不可齐平安装 |
外壳 | 锌合金压铸件; PPE头 |
毛重 (g) | 356 |
开关距离 (mm) | 4 ... 20 |
尺寸 | 矩形的 |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here