Type 4,SIL3,SILCL3,PL e,Cat. 4
专为在潜在爆炸性环境中保护操作员而设计
集成防冷凝系统
硬件配置:无需编程,易于安装和更换
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:发射端、接收端、标准紧固支架、预接线连接电缆
带ATEX 区域Zone 2/22外壳的通道控制安全光栅。自动重启,扩展范围。内置用于外部继电器监控(EDM)的反馈输入。并带有10m长的预装线缆。
1010253
Type 4,SIL3,SILCL3,PL e,Cat. 4
专为在潜在爆炸性环境中保护操作员而设计
集成防冷凝系统
硬件配置:无需编程,易于安装和更换
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:发射端、接收端、标准紧固支架、预接线连接电缆
安全水平 | 4级 - PL e |
防护区域高度(mm) | 610 |
分辨率(mm) | 30 |
受控高度(毫米) | 600 |
最大范围 (m) | 17 |
重启 | 自动 |
光幕功能系统 | 发射器 - 接收器 |
安全等级(SIL / PL) | 4级 - SIL 3 - SILCL 3 - PL e - Cat. 4 |
工作温度 (°C) | -10到55 |
响应时间 (ms) | 9 |
光束数 | 31 |
最大连接电缆长度 (m) | 10 |
信号显示 | 用于指示光幕状态和诊断的 LED |
安全输出型 | 2路故障安全PNP (500 mA, 24 VDC下),自控制,带短路、过载、奇偶性反向保护功能 |
连接 | 电缆输出 |
MTTFD (ISO 13849-1) 年龄 | 100 |
安全输出数量 | 2 OSSD PNP (500 mA at 24 VDC) |
安全功能 | 带外部模块 |
特别版 | ATEX |
检测距离 | 手掌 |
工作距离 (m) | 可选8或17 |
包装尺寸 W x H x L (mm) | 145 x 910 x 200 |
产品分类 | C |
海关代码 | 85365019 |
电源 (VDC) | 24 ± 20% |
总高度 (mm) | 780 |
防护等级 | IP 65 |
紧固方法 | 一套 4 个环形支架(随附) |
直径 (mm) | 56 |
毛重 (g) | 6572,96 |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
Type 4,SIL3,SILCL3,PL e,Cat. 4
专为在潜在爆炸性环境中保护操作员而设计
集成防冷凝系统
硬件配置:无需编程,易于安装和更换
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:发射端、接收端、标准紧固支架、预接线连接电缆
安全水平 | 4级 - PL e |
防护区域高度(mm) | 610 |
分辨率(mm) | 30 |
受控高度(毫米) | 600 |
最大范围 (m) | 17 |
重启 | 自动 |
光幕功能系统 | 发射器 - 接收器 |
安全等级(SIL / PL) | 4级 - SIL 3 - SILCL 3 - PL e - Cat. 4 |
工作温度 (°C) | -10到55 |
响应时间 (ms) | 9 |
光束数 | 31 |
最大连接电缆长度 (m) | 10 |
信号显示 | 用于指示光幕状态和诊断的 LED |
安全输出型 | 2路故障安全PNP (500 mA, 24 VDC下),自控制,带短路、过载、奇偶性反向保护功能 |
连接 | 电缆输出 |
MTTFD (ISO 13849-1) 年龄 | 100 |
安全输出数量 | 2 OSSD PNP (500 mA at 24 VDC) |
安全功能 | 带外部模块 |
特别版 | ATEX |
检测距离 | 手掌 |
工作距离 (m) | 可选8或17 |
包装尺寸 W x H x L (mm) | 145 x 910 x 200 |
产品分类 | C |
海关代码 | 85365019 |
电源 (VDC) | 24 ± 20% |
总高度 (mm) | 780 |
防护等级 | IP 65 |
紧固方法 | 一套 4 个环形支架(随附) |
直径 (mm) | 56 |
毛重 (g) | 6572,96 |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here