安全光幕:Type2,SIL1,SILCL1,PL c,Cat.2
横截面:35 x 45 mm
硬件配置:无需编程,易于安装和更换
通过M12连接器进行连接和配置
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:发射端、接收端和标准紧固支架
手掌防护安全光幕,可选自动/手动重启。内置用于外部继电器监控(EDM)的反馈输入。
1344311
安全光幕:Type2,SIL1,SILCL1,PL c,Cat.2
横截面:35 x 45 mm
硬件配置:无需编程,易于安装和更换
通过M12连接器进行连接和配置
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:发射端、接收端和标准紧固支架
安全水平 | 2级 - PL c |
防护区域高度(mm) | 1810 |
分辨率(mm) | 40 |
最大范围 (m) | 18 |
重启 | 用户可选自动或手动 |
光幕功能系统 | 发射器 - 接收器 |
安全等级(SIL / PL) | 2级 -SILCL 1 - PL c – Cat. 2 |
工作温度 (°C) | 0到55 |
响应时间 (ms) | 12 |
光束数 | 60 |
最大连接电缆长度 (m) | 100 |
信号显示 | 7 段显示和 LED,用于显示光幕的状态和诊断 |
安全输出型 | 2路故障安全PNP (500 mA, 24 VDC下),自控制,带短路、过载、奇偶性反向保护功能 |
连接 | M12,5芯连接器(发射器),M12,8芯连接器(接收器) |
MTTFD (ISO 13849-1) 年龄 | 93,89 |
安全输出数量 | 2 OSSD PNP (500 mA at 24 VDC) |
安全功能 | Integrated |
检测距离 | 手掌 |
包装尺寸 W x H x L (mm) | 145 x 1980 x 200 |
产品分类 | B |
海关代码 | 85365019 |
电源 (VDC) | 24 ± 20% |
总高度 (mm) | 1911 |
截面尺寸 (mm) | 35 x 45 |
防护等级 | IP 65 |
紧固方法 | 后槽、带一组 LS 型支架的侧槽(随附)或顶部和下端带 SFB 旋转支架(可选) |
毛重 (g) | 8701,36 |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
安全光幕:Type2,SIL1,SILCL1,PL c,Cat.2
横截面:35 x 45 mm
硬件配置:无需编程,易于安装和更换
通过M12连接器进行连接和配置
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:发射端、接收端和标准紧固支架
安全水平 | 2级 - PL c |
防护区域高度(mm) | 1810 |
分辨率(mm) | 40 |
最大范围 (m) | 18 |
重启 | 用户可选自动或手动 |
光幕功能系统 | 发射器 - 接收器 |
安全等级(SIL / PL) | 2级 -SILCL 1 - PL c – Cat. 2 |
工作温度 (°C) | 0到55 |
响应时间 (ms) | 12 |
光束数 | 60 |
最大连接电缆长度 (m) | 100 |
信号显示 | 7 段显示和 LED,用于显示光幕的状态和诊断 |
安全输出型 | 2路故障安全PNP (500 mA, 24 VDC下),自控制,带短路、过载、奇偶性反向保护功能 |
连接 | M12,5芯连接器(发射器),M12,8芯连接器(接收器) |
MTTFD (ISO 13849-1) 年龄 | 93,89 |
安全输出数量 | 2 OSSD PNP (500 mA at 24 VDC) |
安全功能 | Integrated |
检测距离 | 手掌 |
包装尺寸 W x H x L (mm) | 145 x 1980 x 200 |
产品分类 | B |
海关代码 | 85365019 |
电源 (VDC) | 24 ± 20% |
总高度 (mm) | 1911 |
截面尺寸 (mm) | 35 x 45 |
防护等级 | IP 65 |
紧固方法 | 后槽、带一组 LS 型支架的侧槽(随附)或顶部和下端带 SFB 旋转支架(可选) |
毛重 (g) | 8701,36 |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here