安全光幕:Type4,SIL3,SILCL3,PL e,Cat.4
横截面:35 x 45 mm
硬件配置:无需编程,易于安装和更换
通过M12连接器进行连接和配置
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:发射端、接收端和标准紧固支架
可以串联连接的带浮动功能的手掌防护安全光幕,自动重启(主站)
1334189
安全光幕:Type4,SIL3,SILCL3,PL e,Cat.4
横截面:35 x 45 mm
硬件配置:无需编程,易于安装和更换
通过M12连接器进行连接和配置
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:发射端、接收端和标准紧固支架
安全水平 | 4级 - PL e |
防护区域高度(mm) | 1510 |
分辨率(mm) | 20 |
最大范围 (m) | 18 |
重启 | 用户可选自动或手动 |
光幕功能系统 | 发射器 - 接收器 |
消隐功能 | 浮动 |
主从型号 | 是 |
安全等级(SIL / PL) | 4级 - SILCL 3 - PL e - Cat. 4 |
工作温度 (°C) | 0到55 |
响应时间 (ms) | 34,5 |
光束数 | |
最大连接电缆长度 (m) | |
信号显示 | 7 段显示和 LED,用于显示光幕的状态和诊断 |
安全输出型 | 2路故障安全PNP (500 mA, 24 VDC下),自控制,带短路、过载、奇偶性反向保护功能 |
连接 | M12 5极连接器(发射器),M12 8极(接收器),M12 5极,用于从属连接(发射器和接收器) |
MTTFD (ISO 13849-1) 年龄 | 61,55 |
无需物体存在时的消隐 | 1、2或3光束 |
安全输出数量 | |
安全功能 | 带外部模块 |
检测距离 | 手掌 |
包装尺寸 W x H x L (mm) | |
产品分类 | C |
海关代码 | 85365019 |
电源 (VDC) | 24 ± 20% |
总高度 (mm) | 1611 |
截面尺寸 (mm) | 35 x 45 |
防护等级 | IP 65 |
紧固方法 | 后槽、带一组 LS 型支架的侧槽(随附)或顶部和下端带 SFB 旋转支架(可选) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
安全光幕:Type4,SIL3,SILCL3,PL e,Cat.4
横截面:35 x 45 mm
硬件配置:无需编程,易于安装和更换
通过M12连接器进行连接和配置
可使用高达100米的非屏蔽电缆连接安全光幕
盒子里的东西:发射端、接收端和标准紧固支架
安全水平 | 4级 - PL e |
防护区域高度(mm) | 1510 |
分辨率(mm) | 20 |
最大范围 (m) | 18 |
重启 | 用户可选自动或手动 |
光幕功能系统 | 发射器 - 接收器 |
消隐功能 | 浮动 |
主从型号 | 是 |
安全等级(SIL / PL) | 4级 - SILCL 3 - PL e - Cat. 4 |
工作温度 (°C) | 0到55 |
响应时间 (ms) | 34,5 |
光束数 | |
最大连接电缆长度 (m) | |
信号显示 | 7 段显示和 LED,用于显示光幕的状态和诊断 |
安全输出型 | 2路故障安全PNP (500 mA, 24 VDC下),自控制,带短路、过载、奇偶性反向保护功能 |
连接 | M12 5极连接器(发射器),M12 8极(接收器),M12 5极,用于从属连接(发射器和接收器) |
MTTFD (ISO 13849-1) 年龄 | 61,55 |
无需物体存在时的消隐 | 1、2或3光束 |
安全输出数量 | |
安全功能 | 带外部模块 |
检测距离 | 手掌 |
包装尺寸 W x H x L (mm) | |
产品分类 | C |
海关代码 | 85365019 |
电源 (VDC) | 24 ± 20% |
总高度 (mm) | 1611 |
截面尺寸 (mm) | 35 x 45 |
防护等级 | IP 65 |
紧固方法 | 后槽、带一组 LS 型支架的侧槽(随附)或顶部和下端带 SFB 旋转支架(可选) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here