2路可编程静态输出(PNP)+RS-485编程接口
软件配置:易于使用扩展参数选择
光幕和接口之间的最大长度连接线缆:100m
带数字量输出路的测量光幕(RS-485)
1250279
2路可编程静态输出(PNP)+RS-485编程接口
软件配置:易于使用扩展参数选择
光幕和接口之间的最大长度连接线缆:100m
受控高度(毫米) | 2970 |
最大范围 (m) | |
工作温度 (°C) | -10到55 |
光束数 | |
信号显示 | 用于指示光幕状态和诊断的 LED |
连接 | M12,5芯连接器(发射器),M12,8芯连接器(接收器), M5 4芯连接器,用于编程接口 |
输出 | RS-485串行线路(最多3个节点) + 2路固态0或24V可编程数字量输出(推挽式) |
包装尺寸 W x H x L (mm) | |
可编程性 | |
产品分类 | C |
海关代码 | 85365019 |
输出类型 | RS-485串行线路 |
电源 (VDC) | 24 ± 20% |
光束间距 (mm) | 30 |
总高度 (mm) | 3063 |
截面尺寸 (mm) | 28 x 30 |
防护等级 | IP 65 - IP 67 |
紧固方法 | 带一组 LE 型支架的后槽(随附)或顶部和下端,带旋转支架 SFB E(可选) |
毛重 (g) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
2路可编程静态输出(PNP)+RS-485编程接口
软件配置:易于使用扩展参数选择
光幕和接口之间的最大长度连接线缆:100m
受控高度(毫米) | 2970 |
最大范围 (m) | |
工作温度 (°C) | -10到55 |
光束数 | |
信号显示 | 用于指示光幕状态和诊断的 LED |
连接 | M12,5芯连接器(发射器),M12,8芯连接器(接收器), M5 4芯连接器,用于编程接口 |
输出 | RS-485串行线路(最多3个节点) + 2路固态0或24V可编程数字量输出(推挽式) |
包装尺寸 W x H x L (mm) | |
可编程性 | |
产品分类 | C |
海关代码 | 85365019 |
输出类型 | RS-485串行线路 |
电源 (VDC) | 24 ± 20% |
光束间距 (mm) | 30 |
总高度 (mm) | 3063 |
截面尺寸 (mm) | 28 x 30 |
防护等级 | IP 65 - IP 67 |
紧固方法 | 带一组 LE 型支架的后槽(随附)或顶部和下端,带旋转支架 SFB E(可选) |
毛重 (g) |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here