ADMIRAL – Status display

Emitter – All models

1 Yellow LED	2 Red LED	3 Green LED	Display	Meaning
⊗	⊗	⊗	8	System power-on – Initial TEST
⊗	⊗	⊗	L / H	TEST condition
⊗	⊗	⊗	L	GUARD condition. Low range
⊗	⊗	⊗	H	GUARD condition. High range
⊗	⊗	⊗	Code	FAIL condition – The type of fault is identified by the code number on display. See next «Fail condition tablel»

Fail condition

Display code	Meaning
F – P	Range selection incorrect or modified
F – A	Internal error (add-on board)
F – 3	Internal error (master board)
F – 4	Internal error

 

Receiver – ADMIRAL AD

1 Yellow LED	2 Red LED	3 Green LED	Display	Meaning
⊗	⊗	⊗	8	System power-on – Initial TEST
⊗	⊗	⊗	–	BREAK condition
⊗	⊗	⊗	–	Received beam signal intensity is weak
⊗	⊗	⊗	–	GUARD condition
⊗	⊗	⊗	Code	FAIL condition – The type of fault is identified by the code number on display. See next «Fail condition table»

Fail condition

Display code	Meaning
O	Overcurrent on one or both outputs (OSSD)
F – 1	Detection of a hazardous interfering Emitter condition. The Receiver is able to receive the beams emitted by two different Emitters at the same time. (This fault is displayed for at least 30 seconds)
F – 2	Connection of load between static outputs (OSSD) and the positive power supply line (+ 24 Vdc)
F – 4	Internal failure relating to the microcontroller boards
F – 5	Erroneous connection of static outputs (OSSD)
F – 6	Probable short circuit between the two outputs (OSSD)

 

Receiver – ADMIRAL AX

1 Yellow LED	2 Red LED	3 Green LED	Display	Meaning
⊗	⊗	⊗	8	System power-on – Initial TEST
⊗	⊗	⊗	C	C displayed for 10 sec. – Manual restart with feedback disabled
⊗	⊗	⊗	C	C displayed for 10 sec. – Manual restart with feedback enabled
⊗	⊗	⊗	C	C displayed for 10 sec. – Automatic restart with feedback disabled
⊗	⊗	⊗	C	C displayed for 10 sec. – Automatic restart with feedback enabled
⊗	⊗	⊗	–	BREAK condition
⊗	⊗	⊗	D	BREAK condition with weak signal
⊗	⊗	⊗	–	CLEAR condition. Waiting for restart
⊗	⊗	⊗	D	CLEAR condition with weak signal
⊗ Blinking	⊗	⊗	–	Master in CLEAR, Slave in BREAK conditions (Master Models only)
⊗ Blinking	⊗	⊗	D	Master in CLEAR, Slave in BREAK conditions with weak signal.(Master Models only)
⊗	⊗	⊗	–	GUARD condition
⊗	⊗	⊗	D	GUARD condition with weak signal
⊗	⊗	⊗		Receiver initialization
⊗	⊗	⊗	Code	FAIL condition – The type of fault is identified by the code number on display. See next «Fail condition table»

 

Fail condition

Display code	Meaning
O	Overload of the OSSD static outputs
F – C	Customer configuration rejected
F – 2	OSSD erroneously connectedt o 24VDC
F – E	External Feedback contactors missed
F – 3	Internal error
F – 4
F – A
F – 6	OSSD1 – OSSD2 short–circuit
F – 0	Overload of the OSSD static outputs (only for MASTER models)
F – 5	OSSD static outputs error
F – I	Interfering dangerous Emitter detected. The receiver is able to receive simultaneously the beams from two different Emitters (30 sec)
F – U	SLAVE connections incorrect (only for MASTER models)
F – H	User configuration changed without system restart (only for MASTER models)

 

Receiver – ADMIRAL AX BK

1 Yellow LED	2 Red LED	3 Green LED	Display	Meaning
⊗	⊗	⊗	8	System power-on – Initial TEST
⊗	⊗	⊗	C	C displayed for 10 sec. – Blanking S.O.P.O. (Without Object Presence Obligation) Mode A1
⊗	⊗	⊗	C	C displayed for 10 sec. – Blanking S.O.P.O. (Without Object Presence Obligation) Mode A2
⊗ Blinking	⊗	⊗	C	C displayed for 10 sec. – Blanking S.O.P.O. (Without Object Presence Obligation) Mode A3
⊗	⊗	⊗	C	C displayed for 10 sec. – Blanking C.O.P.O. (With Object Presence Obligation) Mode B1
⊗	⊗	⊗	C	C displayed for 10 sec. – Blanking C.O.P.O. (With Object Presence Obligation) Mode B2
⊗	⊗	⊗	–	BREAK condition
⊗	⊗	⊗	D	BREAK condition with weak signal
⊗	⊗	⊗	B	BREAK condition in case of Mode B1/B2 blanking
⊗	⊗	⊗	B	BREAK condition in case of Mode B1/B2 blanking with weak signal
⊗	⊗	⊗	J	Master in CLEAR, Slave in BREAK conditions (Master Models only)
⊗	⊗	⊗	J	Master in CLEAR, Slave in BREAK conditions with weak signal.(Master Models only)
⊗	⊗	⊗	–	GUARD condition
⊗	⊗	⊗	–	GUARD condition with weak signal
⊗	⊗	⊗	R	Active blanking conditions
⊗	⊗	⊗	R	Active blanking conditions with weak signal
⊗	⊗	⊗		Receiver initialization
⊗	⊗	⊗	Code	FAIL condition – The type of fault is identified by the code number on display. See previous «Fail condition table»