Safety interface for monitoring emergency stop buttons and safety switches
With 2 NO guided-contact safety relays
The Start/Restart can be either Automatic/Manual
EDM Feedback input for external contactors monitoring
Safety Interface for emergency stop buttons and safety switches with selectable automatic or manual Start/Restart command. 2NO. Screw Terminal Blocks
1330803
Safety interface for monitoring emergency stop buttons and safety switches
With 2 NO guided-contact safety relays
The Start/Restart can be either Automatic/Manual
EDM Feedback input for external contactors monitoring
Safety level | PL e |
Safety level (SIL / PL) | PL e - Cat. 4 |
Operating temperature (°C) | - 30 ... 55 |
Response time (ms) | ≤ 20 |
Signalling | LEDs indication for status and diagnostic: power supply, channel 1 and channel 2 |
Connections | Removable terminal blocks, screw contacts |
MTTFD (ISO13849) years | The values depend on the type of use. Refer to the technical manual |
Safety devices to be connected | Emergency stop buttons and safety switches |
Min. switching current at 24 VDC (mA) | 6 |
Safety relay outputs | 2 NO (6A at 250 VAC) |
Product class | A |
Power supply (VDC) | 24 ± 20% |
Dimensions HxWxD (mm) | 99 x 22,5 x 114,5 |
Degree of protection | IP2X |
Fastening | 35 mm DIN rail fastening according to EN 50022-35 standard |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
Safety interface for monitoring emergency stop buttons and safety switches
With 2 NO guided-contact safety relays
The Start/Restart can be either Automatic/Manual
EDM Feedback input for external contactors monitoring
Safety level | PL e |
Safety level (SIL / PL) | PL e - Cat. 4 |
Operating temperature (°C) | - 30 ... 55 |
Response time (ms) | ≤ 20 |
Signalling | LEDs indication for status and diagnostic: power supply, channel 1 and channel 2 |
Connections | Removable terminal blocks, screw contacts |
MTTFD (ISO13849) years | The values depend on the type of use. Refer to the technical manual |
Safety devices to be connected | Emergency stop buttons and safety switches |
Min. switching current at 24 VDC (mA) | 6 |
Safety relay outputs | 2 NO (6A at 250 VAC) |
Product class | A |
Power supply (VDC) | 24 ± 20% |
Dimensions HxWxD (mm) | 99 x 22,5 x 114,5 |
Degree of protection | IP2X |
Fastening | 35 mm DIN rail fastening according to EN 50022-35 standard |
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here
This section is reserved for registered users.
Do you already have an account? Please log in
If you are not registered yet you can register here