Test Rod for Safety Light Curtains. Diameter 20 mm
1330961
The test rod is an opaque cylinder used after the installation of a safety light curtain to verify that no beams are bypassed due to the presence of reflecting surfaces
The test is carried out by slowly moving the test rod (Ø = Resolution) in the centre and then along each side of the protected area. During this procedure the Green led on the Receiver must always remain in the off state
| Packaging dimensions HxLxW (mm) | 235 x 110 x 110 |
| Product class | B |
| Custom tariff | 76082089 |
| Diameter (mm) | 20 |
| Gross weight (g) | 106,9 |
The test rod is an opaque cylinder used after the installation of a safety light curtain to verify that no beams are bypassed due to the presence of reflecting surfaces
The test is carried out by slowly moving the test rod (Ø = Resolution) in the centre and then along each side of the protected area. During this procedure the Green led on the Receiver must always remain in the off state
| Packaging dimensions HxLxW (mm) | 235 x 110 x 110 |
| Product class | B |
| Custom tariff | 76082089 |
| Diameter (mm) | 20 |
| Gross weight (g) | 106,9 |
Italiano
Français
Deutsch
Español
Português
简体中文
한국어
