VISION – Status display

Emitter – VISION V, VISION VXL, VISION MXL

1 Yellow LED2 Red LED3 Green LEDMeaning
System power-on – Initial TEST
TEST condition
GUARD condition. Low range

Emitter – VISION VX

1 Yellow LED2 Red LED3 Green LEDDisplayMeaning
8System power-on – Initial TEST
L / HTEST condition
LGUARD condition. Low range
HGUARD condition. High range
 CODEFAIL condition – The type of fault is identified by the code number on display. See next „fail condition table“

Fail condition

Display codeMeaning
F – PRange selection incorrect or modified
F – AInternal error (add-on board)
F – 3Internal error (master board)
F – 4Internal error

 

Receiver – VISION V, VISION VXL

1 Yellow LED2 Red LED3 Green LED4 OSSD FAIL LEDMeaning
System power-on – Initial TEST
BlinkingManual/automatic restart with feedback enabled/disabled. (VISION VXL models only)
BREAK condition
Received beam signal intensity is weak
GUARD condition

Receiver – VISION VX

1 Yellow LED2 Red LED3 Green LEDDisplayMeaning
8System power-on – Initial TEST
CC displayed for 10 sec. – Manual restart with feedback disabled (not for slave models)
CC displayed for 10 sec. – Manual restart with feedback enabled (not for slave models)
CC displayed for 10 sec. – Automatic restart with feedback disabled (not for slave models)
CC displayed for 10 sec. – Automatic restart with feedback enabled (not for slave models)

BREAK condition

D

BREAK condition with weak signal

CLEAR condition. Waiting for restart (not for slave models)

D

CLEAR condition with weak signal (not for slave models)
Blinking

Master in CLEAR, Slave in BREAK conditions (Master Models only)
Blinking 

D

Master in CLEAR, Slave in BREAK conditions with weak signal.(Master Models only)
GUARD condition
DGUARD condition with weak signal
 Receiver initialization
CodeFAIL condition – The type of fault is identified by the code number on display. See next „Fail condition tablel“

 

Fail condition

Display codeMeaning
OOverload of the OSSD static outputs
F – CCustomer configuration rejected
F – 2OSSD erroneously connectedt o 24VDC
F – EExternal Feedback contactors missed
F – 3Internal error
F – 4
F – A
F – 6OSSD1 OSSD2 shortcircuit
F – 0Overload of the OSSD static outputs (only for MASTER models)
F – 5OSSD static outputs error
F – 1Interfering dangerous Emitter detected.
The receiver is able to receive simultaneously the beams from two different Emitters (30 sec)
F – USLAVE connections incorrect (only for MASTER models)
F – HUser configuration changed without system restart (only for MASTER models)

 

Receiver – VISION MXL

1 Three colour LEDS1 LEDS2 LEDMUT LEDOV LEDMeaning
System power-on – Initial TEST
First 5 s. Manual restart with Muting timeout = 30 s.
First 5 s. Manual restart with Muting timeout = 90 min.
First 5 s. Manual restart with Muting timeout = infinite
First 5 s. Automatic restart with Muting timeout = 30 s.
First 5 s. Automatic restart with Muting timeout = 90 min.
First 5 s. Automatic restart with Muting timeout = infinite.

Status

Status
BREAK condition
CLEAR condition. Waiting for restart

Status
⊗ ⊗
Status
MUTING condition

Status

Status
GUARD condition

Status

Status
OVERRIDE condition

Status

Status
BlinkingOVERRIDE request with BREAK

Status

Status
Blinking OVERRIDE request with S1 or S2

 

Configuration errors

1 Three colour LEDS1 LEDS2 LEDMUT LEDOV LEDMeaning
BlinkingBlinkingBlinkingOSSD output incorrectly connected to 24VDC
BlinkingBlinkingBlinkingMuting timeout incorrectly selected
BlinkingBlinkingIncorrect connection of pin FBK_K1K2/RESTART
BlinkingBlinkingIncorrect connection of pin OVERRIDE